Fujitomo Electronics Private Limited

One action cleaning system

Easy pushing motion engages connector and initiates cleaner

Disposable with 800+ cleanings per piece

Made from anti static resin

Cleaning micro fibers are densely stranded and debris free

Extendable tip reaches recessed connectors

Cleaning system rotates 180 for a full sweep

Audible click when engaged

FUJITOMO Sheath Stripper is a tool designed to strip optic cables of sheath with least human efforts.
Using Wire Clamp together, you can strip sheath from optical cables more easily and quickly than using knives and handsaws. It's especially convenient when stripping cables for mid span branching. Replacing blades fixed at the center of Stripper, you can use this tool permanently.  Features： 1.Applicable to cables of loose tube type or ribbon type; 2.By adjusting length of the protruded part of blades, cables 3.Blade revolvers make it easy to adjust the blades into cable sheath; with various size of diameters can be stripped; Cables with diameter of 10~25mm can be stripped. 4.Online stripping aluminum - polythene bonded sheath, steel armor sheath and non-metal reinforcing member for optical cable sheath Steps for usage： 1.Wind Wire Clamp tightly on cable before applying it to any fixed objects 2.Adjust the blades of Stripper into the sheath of cable by turning revolver. Be sure not to damage inner fibers 3.Locate Stripper at the scratch point of cable and hold it with hand tightly 4.Pull Stripper backward through the cable so that sheath be stripped. User Manual: 1)ccording to optic cable or cable diameter, user can select stripping tool NO.1 dia.6-12mm or NO.2 dia.12-25mm. 2) The depth of blade can be adjusted based on the sheath thickness of optical cable or electric cable. Two blades can be adjusted at the same time,clockwise for deeper and counterclockwise for upper. Screw nut rotates one turn is 1mm, there is 4 gears in 1turn and each is 0.25mm. 3) The thickness of optic cable or cable striped vertically is defined by its need.When optic cable or cable is put into well-regulated tool.close main body,grasp tool bar tightly with two hands and pull out the of optic cable or cable forcefully.The optic cable or cable is stripped vertically. 4) The optic cable or cable in diameter 17mm is hard.If it can not be stripped at first,it is completed to turn the cool at other direction strip once more. 5) The type used in machine:the string tool is fixed at machine seat on production line.put optic cable or cable into the tool.The upper body holds down the optical cable or cable when it was put in the tool, the depth of blade can be adjusted according to the wall thickness of cable after the screw nuts at both ends were locked, and then strip off. Applications： 1. CATV network 2. Fiber optic communication system construction and maintenance 3. FTTX access network based on PON structure

Fiber Optic Patch Panel is a 19 inch rack mount fiber optic enclosure for managing fiber optic cables in machine room in Fiber to the home application.Fibers are easily accessible through a sliding, while rear cable management maintains proper slacking and spooling. 1U and 2U Fiber Optic Patch Panel is used as fiber termination panel for optical fiber wiring, fixation, splicing and patching. Based on different adapter type, there are LC fiber patch panel, SC fiber patch panel, FC fiber patch panel, ST fiber patch panel, etc.

Suited to SM fiber and MM fiber (9μm,50μm and 62.5μm)

It is ideal choice of active apparatus used pigtail

Excellent temperature performance

Buffer material: PVC,LSZH,Hytrel,NYLON,PVDF

Ribbon fiber splice protection sleeves.

• Tensile strength: 16MPa
• Length: 40
• Operating temperature range: -45℃~100℃/-45℃~135℃
• Fiber count: 4/6/8/12 Cores
• Dielectric Strength: 25KV/mm
• Application: FTTH FTTxFTTB Network

1.FTTH Fiber optic Drop Cable dead end anchor Clamp is used to connect a overhead fiber cable to a optical devices or a house, widely used indoor / outdoor installation.
2.This drop cable clamp is made of stainless steel materials/nylon, guarantees long time of usage.
3.Drop tension clamp is equipped with stainles steel perforated shim, which increase the tension load on stainless steel clamp without cable slip and damage.
4.The stainless steel tail wire/ bail allows installations on walls, poles with drive hooks, pole brackets, FTTH brackets and other drop wire fitting or hardwares.
5.Full stainless steel or plastic shims are available and all the assemblies passed the tensile tests.

OTDR Launch cable is designed to aid in the testing of fiber optic cable when using an OTDR. The OTDR Launch Fiber box is used with Optical. Time Domain Reflectometers(OTDR’s) to help minimize theeffects of the OTDR’s launch pulse on measurement uncertainty. Available in different configurations and
fiber lengths.

Compact & strong & light

Standard length: 100m; 300m; 500m; 1 km; 2 km

Provide various models connecting head

Applicable to any OTDR test instrument

Cable used for OTDR launch

Used OTDR receiving optical fiber cable

Using OTDR measurement of fiber optic lines connecting the proximal and distal insertion loss and high reflectivity

Used to eliminate the OTDR test blind area.

Lightweight shears ideal for cutting Kevlar® strength members found in fiber optic cable construction.
Ergonomic molded handles provide comfort for both right and left handed users.
One micro-serrated blade reduces slippage for more positive cutting action.
Blades made from high carbon molybdenum,and vanadium steel for long life.
KC-1 availble with nylon pouch with belt loop.
Length:140mm, weight: 70g

 

45mm 60mm, PE EVA and Stainless steel, 40mm 60mm, 0.5mm/0.8mm/1.0mm/1.2mm/1.5mm, 110℃~130℃, Transparent, 100pcs/bag, protection sleeve fiber optic

This empty bottle is an ideal plastic holder for alcohol which is for optical fiber cleaning, you can press the cap to release the alcohol on the paper or swab cotton to cleaning the fiber optic adapter, flange and the bare fiber in FTTH works. Body is made from good plastic, not easy to break. This empty bottle is good for filling alcohol for cleaning work. Press design,one-hand operation. Just place a cotton pad or dust cloth on the top and press the center of the lid, then the liquid will be pumped out and absorbed by the cotton or cloth.